Entry-level machines
Garrett ACE 300 vs ACE 400: The Gap Is Smaller Than the Price
Quick answer
Buy the ACE 300 at $269.99 and spend the difference on a pinpointer. The ACE 400 at $357.99 adds iron audio and a higher operating frequency, and Garrett publishes the same 0 to 99 target ID, electronic pinpointing and adjustable frequency on both. The gap is smaller than the price implies.
Garrett ACE 300
$269.99Digital target ID 0 to 99, iron resolution discrimination, electronic pinpointing, adjustable frequency, searchcoil cover, made in the USA.
Best for: coin and jewelry hunting in parks
Check price on Amazon
Garrett ACE 400
$357.99Everything the 300 has plus iron audio and a higher operating frequency for small targets, made in the USA.
Best for: park and field hunting on a mid budget
Check price on AmazonThese two differ far less than the price difference implies, and the honest advice is to buy Garrett ACE 300 and put the saving into a pinpointer. Garrett publishes the same core feature set on both machines: a 0 to 99 digital target ID, electronic pinpointing through a non-motion all metal mode, an adjustable frequency for dodging interference, a searchcoil cover and USA manufacture.
What Garrett ACE 400 adds on the published record is iron audio, which lets you hear discriminated iron rather than only silencing it, and a higher operating frequency than the 300, which improves response to small and low-conductive targets. The ACE 300 publishes iron resolution instead, which is discrimination rather than audio. Neither listing publishes the actual frequencies in kilohertz, so check the current ACE series manual if the exact numbers matter to you. The ACE series specs page collects what Garrett does publish across the line.
Top pick
Garrett ACE 300
The same 0 to 99 target ID, electronic pinpointing and adjustable frequency as the 400, for meaningfully less money.
Price was accurate when this page was compiled and changes often.
On this page
What does the 400 genuinely add?
Iron audio and a higher frequency. Iron audio is the more useful of the two and it is worth understanding properly: a discriminated target normally goes silent, so you learn nothing about it. Iron audio lets the machine grunt at iron instead, which tells you the difference between a nail and a bottle cap sitting next to a coin, and on old sites that is a genuine skill multiplier.
The higher frequency is narrower in effect. Higher frequencies respond better to small, low-conductive targets such as thin gold and small jewellery, and slightly worse to large silver, and they get noisier in mineralised ground. It is a preference rather than an upgrade. If you hunt clad and silver coins in parks, you will not notice which machine you are holding. The Garrett iron audio settings chart covers how to actually use the feature you would be paying for.
How do the published specifications compare?
Same maker, same platform, two listings that publish almost identical things. That similarity is the finding.
Both machines publish USA manufacture and neither listing publishes a weight, a coil size or an operating frequency in kilohertz.
| Model | Price | Made in |
|---|---|---|
| Garrett ACE 300 | $269.99 | USA |
| Garrett ACE 400 | $357.99 | USA |
Figures are taken from each manufacturer's own published listing and specification sheet. A dash means the maker does not publish that figure for that model, not that the feature is absent.
Feature by feature, what is different?
Eight rows and the two machines are identical on five of them. This is what a small upgrade looks like when it is priced as a large one.
Of eight published features, the ACE 300 and ACE 400 are identical on five, and the 400 adds iron audio and a higher operating frequency for roughly a third more money.
| Feature | Garrett ACE 300 | Garrett ACE 400 | Different? |
|---|---|---|---|
| Price | $269.99 | $357.99 | Yes, substantially |
| Digital target ID | 0 to 99 numeric scale | 0 to 99 numeric scale | No |
| Iron handling | Iron resolution discrimination | Iron audio, hear iron before digging | Yes |
| Operating frequency | Not published in kHz | Higher than the 300, not published in kHz | Yes, in kind |
| Electronic pinpointing | Non-motion all metal mode | Non-motion all metal mode | No |
| Adjustable frequency | Yes, to cut interference | Yes, to cut interference | No |
| Searchcoil cover | Included | Included | No |
| Coil supplied | Not published in this listing | Not published in this listing | Not published |
| Made in | USA | USA | No |
From the Garrett listings for both machines. Garrett describes the 400 as running a higher frequency than the 300 without publishing either figure in kilohertz in these listings, so treat the exact numbers as something to confirm in the ACE series manual.
Choose the ACE 300 if
You hunt parks, schools, yards and sports fields for coins and jewellery, which describes most people buying their first proper detector. You get the same numeric target ID, the same pinpointing and the same interference control, and the money you keep buys the accessory that will change your results far more than iron audio would.
Choose it too if you are not yet certain the hobby will stick. A cheaper machine that gets used is worth more than a dearer one that does not, and the ACE 300 resells easily because it is one of the most common detectors in the United States. Start with ACE 300 settings by site type and its target ID chart, and expect your own ground to shift the numbers.
Choose the ACE 400 if
You hunt old sites full of iron, where iron audio earns its money every session. On a homestead or an old farm field the ability to hear what you are rejecting is not a luxury, it is how you avoid walking past a coin lying beside a nail. That is the one scenario where the price difference is clearly justified.
Choose it too if you specifically hunt small gold jewellery, where the higher frequency helps. Otherwise, be honest about which of those two descriptions fits your ground. The ACE 400 target ID chart and its settings page cover the machine, and if you have already decided to spend, read the ACE 400 against the Apex first, because that comparison is far less flattering to the 400.
What about the rest of the ACE line?
Below these two, Garrett ACE 200 at $149.99 publishes the same 0 to 99 target ID scale with a 6.5 by 9 waterproof coil and a three year warranty, and is the cheapest sensible way into the hobby from Garrett. Above them, Garrett ACE Apex at $384.99 adds genuine multi-frequency, Z-Lynk wireless and a lithium battery, which is a real technology step rather than a feature step.
That shape is worth seeing whole before you buy anywhere in it: the jump from the 300 to the 400 is small, and the jump from the 400 to the Apex is large for similar money. The ACE coil compatibility chart shows what fits across the line, and the beginner roundup sets all of them against the rest of the catalog.
Sources
- Garrett ACE 300 product listing and specifications
- Garrett ACE 400 product listing and specifications
- Garrett ACE series owner manual
Frequently asked questions
Is the ACE 400 worth the extra over the ACE 300?
Only if you hunt iron-heavy old sites or specifically chase small gold jewellery. Garrett publishes the same 0 to 99 target ID, electronic pinpointing and adjustable frequency on both, and the 400 adds iron audio and a higher operating frequency. For park and sports field coin hunting, that gap is worth less than a pinpointer would be.
What frequency do the ACE 300 and 400 run at?
Neither Garrett listing publishes a figure in kilohertz, and Garrett describes the 400 as running a higher frequency than the 300 without stating either number. We will not print a figure we cannot source. The current ACE series owner manual carries the published specification, and that is the document to check if the exact number matters to your buying decision.
Do the ACE 300 and 400 use the same coils?
They share the ACE platform coil fitment, so coils are generally interchangeable across the line, but neither listing publishes which coil ships in the box. Check the ACE coil compatibility chart and confirm against the manual before buying a second coil, because the supplied coil size differs across the range even where the connector does not.
Which one holds its value better?
Neither maker publishes resale figures and we will not invent any. What can be said is that both are extremely common machines in the United States with a long production history, which generally means parts, coils and buyers are easy to find. That is worth more to a first-time buyer than a small feature difference.
Researched, not professional advice. This page is compiled from published specifications, manuals and owner-review consensus, not hands-on testing. Target ID numbers, depth figures and settings vary with soil chemistry, moisture, target size, depth, orientation and firmware version, so treat every figure here as a starting point and verify it against your own machine's manual and your own ground. As an Amazon Associate we earn from qualifying purchases.